Hardscape Costing Engine

Paver Patio Cost Calculator

Estimate total project pricing, paver units, crushed gravel subbase, bedding sand, edge restraints, and contractor installation rates for outdoor living spaces.

Patio Dimensions & Geometry

300 sq ft
ft
ft
10% extra
Estimated Total Investment$18.49 / sq ft
$5,546.84

Installed estimate for a 300 sq ft patio with Interlocking Concrete Pavers and 4" compacted aggregate.

Did this calculator solve your problem today?
Paver Materials (10% waste):$1,485
Crushed Stone Base (6.0 tons):$226.59
Bedding Sand (1.4 tons):$57.75
Polymeric Joint Sand (5 bags):$170
Perimeter Edge Restraints (70 lin ft):$157.5
Contractor Installation Labor:$3,450

Paver Patio Installation Mathematics & Material Formulas

A structurally sound interlocking paver patio relies on precision subgrade excavation, high-density aggregate compaction, a screeded bedding sand layer, and edge restraint anchoring. Calculating your material quantities accurately prevents costly delivery delays and surplus waste.

Essential Hardscape Equations
Surface Area (sq ft) = Length in ft × Width in ft
Gravel Base Volume (cu yds) = (Surface Area × (Depth in inches ÷ 12)) ÷ 27 × 1.15
Gravel Base Weight (tons) = Gravel Cubic Yards × 1.4 tons/cu yd
Bedding Sand (cu yds) = (Surface Area × (1 inch ÷ 12)) ÷ 27 × 1.10
Bedding Sand Weight (tons) = Sand Cubic Yards × 1.35 tons/cu yd
Polymeric Joint Sand Bags = Total Square Feet ÷ 65 sq ft per 50 lb bag

1. The Crushed Stone Subbase Layer

The gravel foundation is the most critical structural component of any paver installation. Skipping or under-compacting this layer leads to rutting, pooling water, and uneven settling. For standard pedestrian foot traffic, a 4-inch compacted depth of dense-graded aggregate (crusher run or ABC stone) is standard. In freeze-thaw northern climates or heavy clay soil, increase depth to 6 to 8 inches.

2. Screeded Bedding Sand vs. Stone Dust

Concrete pavers must be laid on a loose, screeded 1-inch layer of coarse concrete sand (ASTM C33), never stone dust or limestone screenings. Stone dust retains moisture and degrades under hydraulic pressure, causing pavers to shift during winter freeze cycles. Coarse sand allows moisture to weep away into the gravel subbase.

Frequently Asked Questions

Is a paver patio cheaper than a poured concrete slab?

A basic broom-finish concrete slab is typically cheaper upfront ($7 to $12 per sq ft) compared to a paver patio ($15 to $28 per sq ft). However, concrete slabs frequently crack over time and require expensive demolition to repair. Pavers are individual units that flex with thermal expansion, never crack from ground movement, and allow individual unit replacement with zero structural scarring.

Can I lay pavers directly on dirt or existing grass?

No. Laying pavers directly on topsoil or grass guarantees immediate failure. Soil expands and contracts with rain, causing severe shifting, sinking, and weed infestation within months. Proper excavation (7 to 9 inches deep), non-woven geotextile fabric, compacted gravel, and bedding sand are mandatory.

Why is polymeric sand necessary for paver joints?

Polymeric sand contains calibrated polymers that harden when activated with water. It forms a durable yet flexible joint seal that prevents weeds from taking root, stops ants and insects from burrowing, and prevents heavy rain from washing the joint sand out into the base.

Related Financial Tools

Interconnected calculations to validate your business economics

View all 177 models →