Fence Cost Per Linear Foot [2026]: Material, Posts & Labor Estimation Guide
Complete 2026 fence pricing guide. Compare wood privacy, vinyl, chain link, and aluminum fencing costs per linear foot with post hole concrete and labor rates.
In 2026, residential fence installation costs average $18 to $42 per linear foot installed, with total costs for a standard 150-linear-foot backyard privacy fence ranging from $2,700 to $6,300. Material costs account for $13 to $34 per linear foot (pressure-treated pine at $16.50/ft, cedar at $24.00/ft, vinyl at $28.50/ft, and ornamental aluminum at $34.00/ft), while contractor labor typically runs $10 to $16 per linear foot. Structural post footings require digging holes 24 to 36 inches deep (below local frost lines) anchored with 1.5 to 2 fifty-pound bags of fast-setting concrete per post.
Calculate Your Custom Fence Installation Cost
Input your linear footage, select wood, vinyl, or chain link materials, and get an exact bill of materials with posts, concrete bags, and labor.
1. Cost Per Linear Foot by Fence Material
Total fencing costs vary primarily by material durability, height (4 ft vs 6 ft vs 8 ft), post spacing, and whether you hire a professional installation crew:
| Fence Material Type | Material Cost / Linear Ft | Installed Cost / Linear Ft (Labor Included) | 150 Linear Ft Estimate |
|---|---|---|---|
| **Pressure-Treated Pine (6 ft Privacy)** | $14.00 to $18.50 | $24.00 to $32.00 | $3,600 to $4,800 |
| **Western Red Cedar (6 ft Privacy)** | $20.00 to $28.00 | $30.00 to $42.00 | $4,500 to $6,300 |
| **Vinyl / PVC Privacy (6 ft)** | $24.00 to $34.00 | $34.00 to $48.00 | $5,100 to $7,200 |
| **Black Chain Link (4 ft / 6 ft)** | $11.00 to $16.00 | $18.00 to $28.00 | $2,700 to $4,200 |
| **Ornamental Aluminum (4 ft / 5 ft)** | $28.00 to $42.00 | $38.00 to $56.00 | $5,700 to $8,400 |
2. Post Spacing & Concrete Footing Formulas
A fence is only as strong as its below-grade structural posts. Over 85% of fence failures occur due to shallow post footings or unanchored corner posts:
1. Total Structural Posts Equation: $$\mathbf{\text{Total Posts}} = \left\lceil (\text{Linear Footage})/(\text{Post Spacing (typically 8 ft))} \right\rceil + 1 + \text{Corners} + \text{Gate Posts}$$ For a 150-linear-foot perimeter with 8-foot spacing, 2 corner turns, and 1 walk gate: $$\text{Posts} = \left\lceil (150)/(8) \right\rceil + 1 + 2 + 1 = 19 + 4 = 23\text{ total posts}$$
2. Concrete Footing Volume: $$\mathbf{\text{Concrete Bags (50 lb)}} = \text{Total Posts} \times 2.0\text{ bags}$$ Each post hole should be dug to a minimum diameter of 3 times the post width (10 to 12 inches for a 4x4 post) and at least 24 to 36 inches deep to extend past local frost lines.
3. Gates, Hardware Kits & Site Access Economics
- Walk Gates (3 to 4 ft wide): Costs $250 to $450 installed including self-closing powder-coated hinges, heavy-duty latch, and anti-sag turnbuckle cable.
- Double Drive Gates (10 to 12 ft wide): Costs $600 to $1,200 installed. Requires heavy-duty 6x6 posts or 3-inch steel pipes to support the cantilevered rotational weight without sagging.
- Old Fence Demolition & Disposal ($3.00 to $5.00 / ft): Tearing out an existing chain link or rotting wood fence, pulling out old concrete plugs, and municipal dump disposal fees add $450 to $750 on a 150-foot project.
4. Contractor Labor vs. DIY Savings
- Contractor Labor ($10.00 to $16.00 / linear ft): Includes laser-transit layout, motorized two-man auger hole excavation, gravel drainage tamp at hole bases, plumb alignment, and pressure-treated rail fastening.
- DIY Outlay: Saves $1,500 to $2,400 in direct labor, but requires renting a gas-powered post hole auger (~$90/day), concrete mixing tub/paddle (~$30/day), and hauling heavy lumber and 2,000+ lbs of concrete bags.
Frequently Asked Questions
Ready to Model Your Numbers?
Our calculators run 100% in your browser. No registration required, zero data saved.